1) In the "system Management" app in the “Autorun manager” disable all unused/rarely used apps.

2) In Settings -> WLAN -> Advanced disable the item "Scanning always available". (Disable this item, only if you are not need to check permanent location)

3) If in location is a bad connection 4G or 3G (constantly switches from 4G to 3G, 3G to 2G, then in Settings -> More -> Mobile networks -> network type to choose the type of network, which caught stable signal(3+ points).

4) It is not recommended to use third-party applications running with power saver mode-tracking applications. They can work constantly in the background and prevent the phone to go into sleep mode.

5) Check the errors in the sync accounts. Go to Settings -> Accounts, choose an account and then check if there is any synchronization errors. If there are errors, then try to sync the account manually.

6) It is not recommended to use a third party chargers for your phone, if for whatever reason you need it, just make sure that the settings were similar to the parameters of the original charge.

You can restart the router first. If the phone still fails to scan the hotspot, perform the following steps:

1. Check whether the router hides the SSID. For details about configuration on the router, see the router User Guide.

2. Detect the frequency and channels set on the router. And please change the channel to improve the signal strength.

3. Check whether the frequency of the router is set to 5 GHz. If yes, set the frequency of the router to 2.4 GHz (only for the phones supporting 2.4 GHz frequency).

4. If the preceding solutions don't work, use another phone to check whether hotspots can be scanned on that phone. If yes, take your phone to an authorized TP-Link service center and check the hardware.

1. If your phone is far from the Wi-Fi router or is isolated from the Wi-Fi router by a wall, the signal strength is weak, which will result in a decreased network speed or poor signal quality.

2. Make sure your phone's protective cover is made of plastics or leather instead of metal, because the metallic protective cover blocks your phone's antenna signals.

3. Try different Wi-Fi channels in the router.

4. Check whether other devices are transmitting massive data traffic, for example, using the laptop to download movies. If yes, properly arrange the network resources.

5. Use the Speed Test or similar software to test the Wi-Fi rate.

6. Connect to Wi-Fi near the router.

1. Check that the Bluetooth headset, Bluetooth car kit, or Bluetooth speaker is in pairing mode. For details of different devices, see their user guides.

2. Check that the Bluetooth headset or speaker has sufficient power, is within the working range of Bluetooth (10 m), and doesn't have obstacles or interferences around.

3. If your phone is already paired with another Bluetooth device, disconnect your phone from that device.

4. Restar the Bluetooth device and your phone, and reconnect your phone to the Bluetooth device.

5. You can also try connecting the Bluetooth device to another phone of a different brand and check whether the problem is solved. Obtain the model of the Bluetooth device (for the Bluetooth car kit, check whether it needs to be installed in advance). If the problem persists, take your phone to an authorized TP-Link service center to check the hardware and software.

Your phone supports third-party applications in APK format only. Make sure the application you are trying to download is in this format.

If the app is not from the app center, you need to set the phone to trust the app source and then install the app. Go to Settings > Security. Touch Unknown sources. Then, install the app again.

The third-party application may not be compatible with your phone. Try using similar apps.

1. Go to Settings > Storage and set the default storage location to your micro SD card.

2. Open the application that you want to download files from, and check whether you can set the storage directory for the downloaded files. If yes, set the download path to your micro SD card. For specific file paths, refer to the directories of the micro SD card in Files.

3. If the problem persists, the videos or files are not allowed to be saved in the micro SD card, which can't be controlled on your phone.

1. Go to Settings-> Battery, touch on the Menu button on the right top corner, and make sure the Battery saver is off.

2. Check whether the battery level is low. At low battery level, to extend the phone usage and protect your phone, your phone's performance is limited. You can charge your phone.

3. Check whether any download task is implementing on the background. File copying operations increase the load of the phone.

4. Check whether there is no space in the storage. If only hundreds of MB is available, open Settings->Storage to manually delete some large files.

5. Check whether the quality of the micro SD card is poor. You can remove the micro SD card or replace a micro SD card and check whether the performance is improved.

6. For online apps, check whether the phone uses data traffic or Wi-Fi network. The performance is also affected by unstable network connections.

7. Check whether your phone is powered on for a long period of time, for example, half a month. Restart your phone to check whether the performance is improved.

8. Check whether the screen is frozen and the system displays non-responded screen when the system is stuck. If yes, the app works improperly. You can update the app, use the app for a while, and find out the regularity of this problem.

9. If the problem is not caused by any of the above reasons, provide information about detailed scenarios, specific operations, app version, and probability of occurrence to TP-Link technical support engineers.

1. If the Wi-Fi hotspot is encrypted, check the password you entered is correct. Note that the password is case-sensitive.

2. Check whether the Wi-Fi hotspot name or password has been changed. If so, obtain the new information and try again.

3. Make sure you are within the working range of the Wi-Fi hotspot; otherwise the Wi-Fi connection will automatically disconnect.

4. The number of connected devices may have reached the Wi-Fi hotspot's limit. Try connecting to another available network.

5. If your phone can't connect to the Wi-Fi hotspot and keeps obtaining an IP address, set a static IP address for it as follows:

   For an encrypted Wi-Fi hotspot, on the Wi-Fi settings screen, touch the hotspot.

  In the displayed dialog box, select advanced options check box. Under IPv4 settings, touch the drop-down list box, and choose Static. Then enter the IPv4 address, Gateway, etc.

  Enter the password, and touch Connect.

Note:

The figures are for your reference only. The actual screens may vary.

Check whether the MAC address filtering function is enabled on the router. If this function is enabled, phones that are not in the access list can't access the Wi-Fi network. For details about configuration on the router, see the router User Guide.

To connect to some public Wi-Fi hotspots, you may need to log in to a web page for registration. For details, contact the Wi-Fi hotspot provider.

If the problem persists, restart Wi-Fi on your phone or restart the Wi-Fi hotspot device.

Note: It is recommended that your phone is fully charged, and back up the data, such as contacts, messages, and call logs that are on your phone before update. We suggest you use FOTA to update your device instead of local update.

Here we are trying to upgrade the TP701A_H10S100D01B20160225R1023_SDCARD version.

2. Connect your phone to the computer via USB cable, choose Media device (MTP) as the USB computer connection.

3. Transfer the package to anywhere in your phone storage or SD card. DO NOT Extract firmware!

4. On your phone, go to Settings > about phone > System Update, click on the Menu button  on the top right corner, and click on Local updates.

5. Find the software update package, click on Update now, and then your phone will enter into the Recovery Mode, please wait it patiently, and then phone will restart automatically once the update completes.

6. Please do not remove the battery and do nothing until the update completes.

1. Use another phone to check whether the problem is caused by the SIM card.

4. Your phone reception may be poor. Take your phone to a place with good reception and try again.

5. You may be experiencing a network rush. Wait a while and try again.

6. If the problem persists, take your phone to an authorized TP-Link service center.

1. Check whether the device working on Airplane mode or one of the SIM card slots in dual-SIM phone is disabled.

2. Check your phone model. The SIM card system may not be supported by this phone model or the SIM card is faulty, then please replace with a SIM card with supported system. Please refer to How can I find the model no of the phone, if you don’t know how to check phone model. Check that your SIM card is working properly and can be detected on another phone.

3. You need to restart your phone after you insert a SIM card into it.

4. If the phone serial number (IMEI number) is lost, on dial screen, please enter '*#06#' to view the phone serial number (IMEI number). If the serial number is lost, bring the phone to a local service center.

5. If the problem persists after you restart your phone, back up important data and restore your phone to its factory settings. Then re-insert the SIM card and check whether it can be detected.

6. If the problem persists, the card tray may be damaged or other problems exist. Take your phone to an authorized TP-Link service center.

There are two ways you can find the model NO.

1. Go to Settings > about phone.

2. Open the back cover, unplug the battery. On the label you can find it.

1. Check whether you can see an USB icon on your phone when the USB cable is connected.

2. If you see the icon, then swipe down from the top of any screen to open the notification panel. Make sure it’s not Charge Only. You may touch it to choose other USB options.

3. If no USB icon is showing, please check if the USB cable connected well or try other USB cables and USB ports.

4. USB devices may be forbidden on the computer, so please allow USB devices in computer Device Manager, or please try another computer.

5. Maybe there are something wrong with phone, please reboot the device and have a try again. If the problem still exist, please backup your device and reset it.

6. At last you may need bring the phone to service center to fix the software, or download the corresponding firmware from official website and update the phone with it.

Hướng dẫn kích hoạt chế độ USB Debugging

1. Vào Settings - About phone

2. Nhấn vào ô "Buil number" 3 lần, sẽ thấy thông báo hiển thị "you are now 4 steps away form being a developer"

3. Tiếp tục nhấn ô "Build number" thêm 2 lần

Hoàn thành kích hoạt!

Kiểm tra nguyên nhân và thực hiện các bước xử lý dưới đây để khắc phục:

1. Tín hiệu Wi-Fi quá yếu không thể kết nối, vui lòng kiểm tra tín hiệu Wi-Fi và thực hiện kết nối khi tín hiệu tốt hơn

2. Bị cấm kết nối do thiết lập giới hạn kết nối trên router (ví dụ lọc MAC/IP), vui lòng thay đổi thiết lập kết nối của router

3. Firmware bị lỗi, vui lòng tải và cập nhật firmware chính hãng

Nếu điện thoại bị rớt nguồn khi đang bật máy, nguyên nhân có thể do pin yếu, lỗi SIM hoặc thẻ nhớ hoặc lỗi firmware (Linux kernel). Vui lòng tháo thẻ SIM và thẻ nhớ, cắm sạc và thử bật lại máy. Nếu vẫn tiếp tục bị lỗi, vui lòng cập nhật lại firmware;

Nếu máy bị rớt nguồn khi đang sử dụng, có thể do có quá nhiều ứng dụng chạy ngầm và máy bị quá tải, lỗi của ứng dụng, quyền kiểm soát ROOT máy bị hư, hệ thống không ổn định hoặc bị hư do nguyên nhân lỗi firmware. Vui lòng tắt bớt các ứng dụng không cần thiết, kiểm tra và tắt các ứng dụng chạy ngầm, tránh để điện thoại bị quá tải quá lâu. Gỡ bỏ các ứng dụng nghi ngờ bị lỗi, format điện thoại và reset điện thoại với firmware chính hãng.

Nếu vẫn không thể khắc phục, mang điện thoại của bạn đến trung tâm bảo hành gần nhất

Kiểm tra nguyên nhân và tiến hành khắc phục theo các bước sau:

1. Điện thoại ở chế độ Máy bay (Airplane mode) hoặc kết nối giữa điện thoại và thẻ SIM yếu, vui lòng tắt chế độ Airplane, gắn lại thẻ SIM và khôi phục kết nối giữa điện thoại và SIM.

2. Một trong hai khe SIM bị tắt, vui lòng vào cài đặt Dual-SIM để kích hoạt thẻ SIM

3. Điện thoại không hỗ trợ thẻ SIM của nhà mạng hoặc thẻ SIM đã bị lỗi, vui lòng thay thế thể SIM khác hoặc nhà cung cấp mạng

4. Mất số IMEI của điện thoại, ở giao diện màn hình thực hiện cuộc gọi, nhấn phím "#06#" để xem, trường hợp không hiển thị, vui lòng mang máy đến trung tâm bảo hành gần nhất

5. Firmware bị lỗi, vui lòng mang điện thoại đến trung tâm bảo hành để khắc phục lỗi phần mềm hoặc tải và cập nhật firmware chính hãng

Kiểm tra các nguyên nhân và thực hiện các bước khắc phục sau đây:

1. Điện thoại bị nhiễm tĩnh điện, bấm phím nguồn để tắt màn hình và bật trở lại. Hầu hết các trường hợp bị lỗi tương tự đều được khắc phục sau khi thực hiện bước này;

2. Màn hình bị ẩm hoặc dính nước, vui lòng lau sạch màn hình;

3. Ứng dụng phản hồi chậm, vui lòng đợi cho đến khi hệ thống trở ổn định lại cho đến khi ứng dụng hoạt động bình thường;

4. Lỗi firmware hoặc màn hình bị hư, vui lòng tải và cập nhật firmware chính hãng;

Nếu có thắc mắc hoặc cần trợ giúp, vui lòng truy cập vào mục những câu hỏi thường gặp (FAQ) để tìm cách khắc phục hoặc liên hệ trực tiếp với bộ phận Hỗ Trợ Khách Hàng